Decor Coatings Ltd logoDecor Coatings
Kingston

Concrete Flooring in Kingston.

Polished, sealed and finished interior concrete floors.

Concrete flooring: plain entry slab between timber posts, then the same slab refinished in a grey stone patternBeforeAfter
About concrete flooring

How we handle concrete flooring in Kingston.


The slab's own aggregate (sand, salt-and-pepper, or full aggregate exposure) determines the final look, so we specify grind depth per the design intent before starting. Densifiers chemically harden the surface; impregnating sealers add stain resistance; gloss levels run from matte through high-gloss on a measured scale. For Kingston concrete floors — residential garages, basements, and light-commercial bays around Williamsville and nearby neighbourhoods — our 623 Fortune Crescent #100 shop is inside Kingston itself. Aggregate exposure matches the design intent (salt-and-pepper vs. heavy expose), a non-negotiable on every quote we write.

Read more about concrete flooring in Kingston

Polished, sealed, and finished interior concrete floors for residential and commercial spaces.

What the finished work looks like

  • Seamless polished finish at the gloss level specified.
  • Densified and sealed against moisture, staining, and routine wear.

Worth raising on the walkthrough

  • Aggregate exposure matches the design intent (salt-and-pepper vs. heavy expose).
  • Floor stays sealed against grease, red wine, and routine household spills.
  • Scratch and furniture-dent resistance holds up under daily use.
Also available in Kingston

Other services in Kingston.


Kingston concrete flooring FAQ

Common questions on concrete flooring in Kingston.


What does a concrete floor project in Kingston typically involve?

Interior concrete flooring — polished, sealed, or stained — is a cost-effective alternative to hardwood or tile. Polished concrete is seamless, low-maintenance, and lasts for decades under light-to-medium traffic, with nothing to delaminate and nothing to strip and reapply.

How long does concrete flooring take in Kingston?

Residential polished-concrete installations typically finish in 2–4 crew-days; commercial spaces scale with square footage and gloss level. We schedule prep, pour or coat, and finish-cure in a sequence that respects the system's manufacturer-rated cure window.

What drives the cost of concrete flooring in Kingston?

Square footage, grind depth (surface vs. aggregate expose), gloss level, and whether the slab needs crack-repair or patching before polishing. Area-specific factors for Kingston are limited to site access (driveway width for a ready-mix truck, or stair access to a basement) — the service scope and finish spec drive the bulk of the quote, not the area itself.

Do you need a permit for a concrete floor project in Kingston?

City of Kingston Building Services issues permits for structural work, foundations, additions, and decks over 60 cm; most surface-finish work on existing slabs does not trigger a permit. For a concrete floor project specifically, most surface-finish work on an existing slab does not trigger a permit, but structural work underneath (new footings, foundations, additions) does. We confirm at the estimate whether your project needs one.

What should a Kingston buyer ask about before committing to a concrete floor project?

Ask how the slab will be prepared, whether it will be tested for moisture before coating, and which coating system is proposed and why. Ask how long before the floor takes foot traffic, and how long before it takes a vehicle or equipment. We answer each of these at the free-estimate walkthrough, before we write a quote.

Start the conversation

Concrete Flooring in Kingston — tell us about the project.


Free estimate. Our 623 Fortune Crescent #100 shop is inside Kingston itself.

Request a free quote

Tell us what you need. We respond within one business day.

We don’t share your details with anyone.