Decor Coatings Ltd logoDecor Coatings
Belleville

Concrete Patios in Belleville.

Backyard patios in plain, stamped or stained concrete.

Covered concrete patio with a large flagstone-style pattern beside a home's sliding doors
About concrete patios

How we handle concrete patios in Belleville.


Decor Coatings runs concrete patios across Belleville — residential properties around Thurlow Ward and nearby neighbourhoods — about a 55–60 minute drive from our Kingston shop along Highway 401, scheduled on dedicated-crew trips. We form the shape, compact sub-base per the load, place mesh or rebar for the expected use, pour, screed, bull-float, cut control joints on an appropriate grid, and finish to the agreed texture. Stamping is done while the slab is still plastic; staining and sealing come after cure. Patio drains properly away from the house (slope + control joints) — the free-estimate walkthrough covers it on-site before we quote.

Read more about concrete patios in Belleville

Backyard patios in plain, stamped, or stained concrete — outdoor durability with design options.

What the finished work looks like

  • Properly sloped slab with control joints cut on an appropriate grid.
  • Chosen finish — plain broom, stamped pattern, acid stain — applied cleanly.

Worth raising on the walkthrough

  • Patio drains properly away from the house (slope + control joints).
  • Finish texture matches what was spec'd (plain, stamped, exposed-aggregate).
  • Sealer system holds up through at least 3 Ontario winters before re-seal.
Also available in Belleville

Other services in Belleville.


Belleville concrete patios FAQ

Common questions on concrete patios in Belleville.


What does a concrete patio project in Belleville typically involve?

Concrete patios are the lowest-maintenance outdoor floor surface over the long run — formed and poured to shape, with plain broom, exposed-aggregate, stamped, or stained finishes to match the yard. Resealed every 3–5 years to handle freeze-thaw and UV.

How long do concrete patios take in Belleville?

Most backyard concrete patios finish in 2–4 crew-days plus cure before furniture + use. We schedule prep, pour or coat, and finish-cure in a sequence that respects the system's manufacturer-rated cure window.

What drives the cost of concrete patios in Belleville?

Patio area and shape complexity, finish spec (plain vs. stamped vs. stained), access for the ready-mix truck, and whether existing patio needs demo first. Area-specific factors for Belleville are limited to site access (driveway width for a ready-mix truck, or stair access to a basement) — the service scope and finish spec drive the bulk of the quote, not the area itself.

Do you need a permit for a concrete patio project in Belleville?

City of Belleville Building Services issues permits for structural work, decks over 60 cm, foundations, and additions; surface-finish work on existing slabs usually does not trigger one. For a concrete patio project specifically, most surface-finish work on an existing slab does not trigger a permit, but structural work underneath (new footings, foundations, additions) does. We confirm at the estimate whether your project needs one.

What should a Belleville buyer ask about before committing to a concrete patio project?

Ask how the base will be prepared, where the control joints go, and how the surface will slope so water drains away from the house. Ask when it can take foot traffic and when it can take a vehicle, and get the mix, reinforcement and finish written on the quote so you can compare bids like for like. We answer each of these at the free-estimate walkthrough, before we write a quote.

Start the conversation

Concrete Patios in Belleville — tell us about the project.


Free estimate. About a 55–60 minute drive from our Kingston shop along Highway 401, scheduled on dedicated-crew trips.

Request a free quote

Tell us what you need. We respond within one business day.

We don’t share your details with anyone.